ELECTRICAL ACCESSORIES

 KENDRIYA VIDYALAYA NO 2 DARBHANGA

ELECTRICAL ACCESSORIES

 Switches. These are used to switch 'on' and switch off the current in any circuit with the phase wire.

 Double Pole Main Switch. It is used in the circuits to control the supply mains at the main board and the whole circuit.

 Wall Sockets. These are used in the circuits to connect any appliance, machine, equipment, table fan, etc., or to test any appliance or equipment by taking the supply wires in series with test lamp through these.

WORK EDUCATION

 Batten or Angle Holders. These are used in the circuits in which the bulbs are attached for lighting fixed on the wooden blocks or junction boxes with walls.

 Pendent Holders. These are used where hanging lighting is required. These are mostly connected with ceiling roses fixed on the wooden boards or junction boxes with roofs.

 Ceiling Roses. These are used in the circuits fixed on the wood blocks or junction boxes with roofs with which connection for ceiling fans, exhaust fans, tube lights and pendant lights

 Fuse Carriers. These are used to control different circuits to divide loads on the circuit and save the circuits in the case of short circuits or overload.

 Multiple Holders. These are used with the batten holders, angle holders or pendent holders to take the additional connections for the appliance, light or equipment, etc.

 Multiple Plugs. These are attached with 2-pin or 3-pin wall sockets to take the additional connections for the appliances and equipment or machines, etc.

 Plugs. These are attached with wall-sockets or multiple-plugs or holders to take the supply for any appliance, equipment, machine or light.

 Connectors. These are attached with the terminals of any appliance or equipment to give the supply

 Bed Switches. It is one of the switch which controls the connection of any light or fan, etc., and is mostly connected for the easy control near the bed